Booma RC IM22 – Intellimatch Version2


Out of stock

SKU: BRC-IM22 Category:

Booma RC IM22 – Intellimatch Version2

The Intellimatch Version 2 builds on the already world acclaimed Intellimatch system. In Version 2 we have added in the ability to subtrim center and endpoints so you can dial out mechanical differences between servos prior to running the Intellimatch. We have also added more enhanced matching and dynamic real time interpolation fro even better performance. The know more about the Intellimatch system please read on…

Welcome to the worlds first Automatic Intelligent Servo Matching System (ISMS) from our sister company Advanced Radio.
Intellimatch is the result of 2 years of research and development, is designed to take the worry out of servo matching and gives you the maximum power, smoothest response and increased life from your servos.

If you have built giant scale models before with multi servo control surfaces then I am sure you will be familiar with the process of manually matching the servos. You generally match servos on 2 end points and maybe a center point. Thats a total of only 3 matching points. There is no way 3 points will accurately match your servos. Also you have to adjust each servo until minimal buzz is heard or you might use an ammeter to minimise current draw. Throw that idea away…

With Intellimatch you say goodbye to traditional methods of servo matching. The Intellimatch system automatically matches servos on 100 points through the servo sweep range. That is 100 points not just the traditional 2 or 3. Intellimatch further adds smoother operation by reading the closest 2 points from the servos current position and then interpolates between the 2 selected points to a resolution of 8192 steps. 8192 step resolution is the highest resolution available today. Another first for Booma RC and Advanced Radio!

The IM22 Intellimatch unit is designed to match 2 sets of 2 servos. Each pair of servos will run independently of each other. An example IM22 usage might be 2 elevator or 2 ailerons servos or ailerons and flaps. IM22 is designed for each control surface using 2 servos Mechanically ganged.

Important Setup Information

Please note: IM14 and IM22 is designed to work with Power Expanders like the Adavanced Radio Power Bus AR1232 (12 in 32 out) and AR824 (8 in 24 out) systems. It is not designed to work with a standard receiver as the power source.
You should not use IM14 or IM22 with a standard receiver because high currents experienced during Intellimatching setup may damage the receiver.
When setting up the IM22 please connect a single input channel 1 or 2 only during setup. After setup is complete then you connect both channels for normal operation.

Click here to download manual!