MKS HV777A Servo

$114.99

13 in stock

SKU: MKSHV777A Categories: , Tag:

MKS HV777A High Voltage Servo with Full Aluminum Case and Titanium Gears

These MKS HV777A servos deliver high torque and with lighting response, coupled with their aluminum case and titanium gears this servo is a very tough servo.

SERVO SPECIFICATION

Dead Band: 0.0008 ms (Default)
Control System: +Pulse Width Control
Working Frequency: 1520μs / 333hz
(RX) Required Pulse: 3.5 ~8.4 Volt Peak to Peak Square Wave
Operating Voltage: 6.0 ~8.4 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (6V): 0.13 sec/60° degrees at no load
Operating Speed (7.4V): 0.11 sec/60° degrees at no load
Operating Speed (8.4V): 0.10 sec/60° degrees at no load
Stall Torque (6V): 409 oz/in (29.5 kg/cm)
Stall Torque (7.4V): 506 oz/in (36.5 kg/cm)
Stall Torque (8.4V): 561 oz/in (40.4 kg/cm)
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Driver Type: FET
Bearing Type: Dual Ball Bearings
Gear Type: Titanium Gears
Programmable: NO
Connector Wire Length: 15.0 cm (5.9 in)
Dimensions: 40X20X40 mm (1.57×0.97×1.57 in)
Weight: 75.45 g

MKS HV777A High Voltage Servo

In over 40 years in the rc hobby I’ve used many different brands of servos and MKS servos have proven to be high quality servos in many of applications that I use on my models. From small electrics to 222cc aircraft I have never used a better servo than MKS! Kelley Payne

You may also like…

×
×
×
×